Your furnace is a key part of your home. Without one, you wouldn’t be able to stay warm during cold weather. Yet furnaces can have some problems that are more typical than others.

Let’s review these problems and discuss what they might cost to fix so you know before you contact an HVAC technician. Some of the most common furnace repair issues include:

  • Furnace won’t turn on
  • Furnace doesn’t stay lit
  • Furnace won’t blow hot air
  • Furnace won’t turn off

1. My Furnace Won’t Turn On

There are a few reasons why your furnace won’t turn on, so make sure to go through all of them.

  • Is your thermostat set right? Make sure it’s set to “heat,” “auto” and that your preferred temperature is higher than the room’s current temperature. If you use a programmable thermostat, make sure it has fresh batteries.
  • Is the circuit breaker tripped? Your furnace can’t run if it doesn’t have electricity. Reset the switch if it’s facing the outside of the electrical panel.
  • Is the furnace switch off? Your furnace has a power switch located on or close to it. Since this switch resembles a light switch, it’s easy to accidentally turn it off. If it was off, it might take your furnace a few minutes to start.
  • Is the air filter clean? A dusty air filter can cause a lot of problems for your furnace. Replace yours if you can’t see light through it.

Estimated Repair Cost

This problem can be complex, so the estimated cost to repair it varies according to what’s wrong.

2. My Furnace Won’t Stay Lit

Your furnace uses a specific sequence when it starts heating your home.

  1. Your thermostat notices the temperature has fallen and tells your furnace to start running.
  2. The draft inducer fan activates to pull in fresh air for combustion.
  3. The gas valve opens for the burners, which are ignited electronically.
  4. The flame sensor signals to your furnace the burners have been ignited.

If something is off during the sequence, your furnace will shut down as a safety precaution.

A couple of possible causes for this problem include:

  • Dirty or malfunctioning flame sensor. If the sensor doesn’t sense a flame, it will turn off your furnace to keep natural gas from getting into your home. The ignition process corrodes flame sensors as time passes. While cleaning during annual furnace maintenance can help, yours may ultimately need to be taken out and changed.
  • Bad limit switch. This safety feature will shut off your furnace if it senses backdrafting. Backdrafting is dangerous, because carbon monoxide and natural gas can seep into your home. These switches can fail due to age, damage or dust accumulation.
  • Old thermostat. If your thermostat isn’t working properly, your furnace won’t be able to run.
  • Dirty air filter. A dirty air filter can limit airflow and force your furnace to shut down to avoid overheating. Make sure to change yours every 30 to 90 days, or whenever you can’t see light through it.

Estimated Repair Cost

These costs are estimates, so it’s necessary to note yours may vary based on your furnace’s brand and model.

  • Flame sensor: $350–$500
  • Limit switch: $150–$300
  • Thermostat: $150–$350
  • Furnace filter: $10-$30

3. My Furnace Blows Cold Air

In many cases, this problem is linked to an incorrect thermostat setting or a dusty air filter that’s restricting airflow. Use the steps above to resolve the problem.

4. My Furnace Can’t Stop Running

If it’s very cold outside or you like your home to be toasty, your furnace may be running for a long time.

If this isn’t what’s happening, make sure your thermostat is set correctly and working properly. If your fan setting is at “on,” the blower motor will be running even when the furnace isn’t, so it’ll sound like your furnace is running all the time.

Alternatively, there might be an issue with the blower motor or your ductwork may be losing air, forcing your furnace to run continuously to make up for the air loss.

Estimated Repair Cost

These costs are estimates, so it’s important to note yours may vary based on your furnace’s brand and model.

  • New blower motor: $250–$800
  • Seal ductwork: varies based on square footage

True Temp Heating & Air Conditioning Can Solve Your Furnace Issues as Soon as Possible

Furnace problems can be an expensive headache, but not when you work with True Temp Heating & Air Conditioning. We’ve been providing the quality, affordable furnace repair Chatsworth homeowners have relied on since year. Call us at 706-695-7492 to request your free estimate today.